Kunkle 363P Safety Valve — 3/4″ x 3/4″ FNPT, Packed Lift Lever, 50-1,000 PSIG (Air/Gas ASME Section VIII)

Photo shows the plain lift lever version. The 363C has a pressure-tight threaded cap and the 363P a packed lift lever.

The Kunkle 363P is a heavy duty safety valve for cryogenic and liquefied air, oxygen and gas service — multi-stage air and gas compressors, intercoolers, aftercoolers and receivers, thermal expansion relief, and full rated capacity discharge on air, gas and liquefied gas lines and systems. A unique three-piece disc assembly with a PTFE seat and seal gives leak-free performance across the whole pressure and temperature range, a control ring allows precise blowdown adjustment, and a pivot between disc and spring corrects misalignment and compensates for spring side thrust. Every valve is 100% tested and inspected for set pressure, blowdown and leakage, and all adjustments are factory sealed to prevent tampering. This variant has a pressure-tight packed lift lever and a 3/4″ FNPT inlet with a 3/4″ FNPT outlet. Construction is a bronze SB-62 housing with stainless steel trim (nozzle and disc). Set pressure range is 50 to 1,000 PSIG (3.45 to 69 barg), relieving 38 to 607 SCFM at 50 to 1,000 psig, over a temperature range of -320°F to 350°F (-195°C to 177°C). ASME Section VIII and Section XIII code service with the ‘UV’ designator, National Board certified. Maximum back pressure is 50 psig. Back pressure increases set pressure on a one-to-one basis and reduces capacity; back pressure in excess of 10% of set pressure is not recommended. Kunkle publishes one air capacity table covering all three models; the figures above are the span across this model’s own set pressure range. Specify your required set pressure when requesting a quote.

↓ Kunkle 189/363/389 Datasheet (PDF)